Standoff - Fixing Method
Internal · Updated June 2026
What this article covers
Standoff mounting is one of Signmax's fixing methods, primarily used for acrylic and aluminium signs mounted on a wall with visible spacing between the sign and the surface. There are two size variants — Standoff Small and Standoff Big — selected based on the dimensions of the sign.
Which size to use
The size is determined by the sign's dimensions:
- If both sides of the sign are 400 mm or more → use Standoff Big
- If one side of the sign is less than 400 mm → use Standoff Small
Standoff Small — components and measurements
| Component | Diameter | Length / Height |
|---|---|---|
| Screw | 3 mm | 30 mm |
| Spacer sleeve | 8 mm | 19 mm |
| Cap | 13 mm | 23 mm |
| Threaded insert/cap with screw (with washer) | 8 mm | 22 mm |
Standoff Big — components and measurements
| Component | Diameter | Length / Height |
|---|---|---|
| Screw | 4 mm | 40 mm |
| Spacer sleeve | 10 mm | 19 mm |
| Cap | 19 mm | 22 mm |
| Threaded insert/cap with screw | 10 mm | 20 mm |
Installation video
Video guide: https://www.youtube.com/watch?v=i8YuRGPjegE
Send this video when a customer asks how to install the standoff, asks about mounting, or asks about setup.
Instructions for agents
Right-click the link above and select "Copy link address" before pasting it into a reply to the customer, to make sure the correct URL is sent.